to NetWare 6.5
Questions, Answers, Braindumps (50-688)
thanx to www.examcheets.com and www.exams.ws for providing
You're installing the Branch Office Application software
on older server hardware that doesn't support bootable
CD drives. How can you install the software?
A. You can't install the Application software without
a bootable CD
B. Create a bootable diskette and install the appropriate
DOS CD drivers on it.
C. Create a bootable diskette and install the IPCONN
drivers from the Novell Client CD on it; then install
across the wire from another server.
D. Mount the installation CD as a volume on another
NetWare server, then configures a bootable diskette
with the IP Server Connection Utility from the Novell
Client CD and install over the wire.
Your application is connected to your Central Office
Server using a T1 link. Under optimal conditions,
how fast can Rsync transfer data with this configuration?
A. 1.5 MB/second
B. 1.5 GB/second
C. 1.5 KB/second
D. 3.8 MB/second
E. 3.8 GB/seconds
You're installing a new NetWare 6.5 server. The hardware
you are using has dual PIII 1.113 GHz CPUs, 384 MB
of RAM, and a 40 GB SCSI SCA hard disk drive. Will
the installation be successful?
A. No, NetWare 6.5 requires 512 MB or more RAM.
B. Yes, the hardware meets all prerequisite requirements.
C. No, NetWare 6.5 doesn't support multiprocessor
D. No, NetWare 6.5 doesn't support SCSI SCA hard disk
E. No, NetWare 6.5 requires an 80 GB or larger hard
You've installed one Application and create a Setting
diskette. You want to use this diskette to install
subsequent Apliances. What parameters do you need
to edit on the diskette before you can do this? (Choose
A. DNS name
B. IP address
C. Volume names
D. Appliance name
E. LDAP server name
F. Central Office Server name
Answer: A B D
During installation you configure an Application with
the IP address of 192.168.1.1. What URL is used to
access the Branch Office Web Administrator?