Questions, Answers, Braindumps (920-245)
cleared exam yesterday and passes it. It was really
hard. I did not find any dumps for this exam. some
of the questions from exams are there. I thank to
all the dumpers who all sent their braindumps to this
site and helped others
You recently reset an Ethernet Routing Switch 5510
using 4.1 code to the factory default settings. You
want to upgrade the code for the 5510 but do not have
a console cable to do it. Which IP address must you
use to perform this task?
Company.com wants port mirroring configured on an
Ethernet Switch 470-48T. They want port 23 configured
as the monitor port to monitor all traffic received
and transmitted between a workstation on port 24 (port
Y) and a workstation on port 25 (port X). Once you
access the "Port. Mirroring Configuration"
screen using the Console Interface (CI) Menus, which
field should you select?
A. <->Port X or Port Y <->
B. <->Port X and Port Y <->
C. ->Port X or Port Y ->
D. ->Port X and Port Y ->
An engineer configures a single instance of Virtual
Router Redundancy Protocol (VRRP) across two Ethernet
Routing Switch 8600s. One Ethernet Routing Switch
8600 is configured with a VRRP Priority of 255 and
the other is configured with a VRRP Priority of 100.
During testing the engineer notices that both Ethernet
Routing Switch 8600s are in Master state. What is
a possible cause for this?
A. The Ethernet Routing Switch 8600 VRRP instances
have been configured with the same VRID.
B. A critical IP interface has not been configured
for the Ethernet Routing Switch 8600 with a VRRP Priority
C. VRRP has been configured on a VLAN on one 8600
and on a brouter port on the other 8600.
D. The Ethernet Routing Switch 8600 VRRP instances
have been configured with different VRIDs.
To monitor the performance of an Ethernet switched
network, why would you use Enterprise Network Management
System OmniView instead of Java Device Manager (JDM)?
A. OmniView supports RMON while JDM does not.
B. JDM is incapable of supporting the Business Policy
Switch while OmniView supports it.
C. OmniView can present statistics in both graphical
and tabular formats while JDM only supports Tabular
D. JDM works with individual network components while
OmniView works with subnets and LAN segments.