i5 iSeries Technical Solutions Designer V5R3
Questions, Answers, Braindumps (000-866)
to all and thanks to www.exams.ws and www.4exam.com
But there’s no need to have it from both of
them, only questions from only one are sufficient
I think. Here is my contribution.
Which of the following requirements must be met for
the \QNTC directory to show file shares on Microsoft
Windows 2003 server?
A. A dedicated LAN adapter must be configured for
B. An IXS must be installed in the iSeries.
C. The network attribute NWSDOMAIN must match the
Microsoft Windows domain.
D. The i5/OS NetServer must be configured to be in
the same domain as the Microsoft Windows servers.
An iSeries administrator is attempting to download
PTFs via the IBM FTP server but is unable to get an
Internet connection. The administrator can PING any
address in the private network but cannot PING any
Internet sites. Which of the following is a probable
cause of the problem?
A. A default route to an Internet gateway is not configured.
B. The iSeries needs to have a dedicated Ethernet
IOA for Internet.
C. The iSeries Firewall is not active.
D. The iSeries FTP server is not running.
Abc .com has an existing Model 820 1-way (IStar) running
a single OS/400 V5R2 partition. Which of the following
changes allow Linux to be installed on this system?
A. Implement the Linux PRPQ.
B. Install V5R3 and establish a partition for Linux.
C. Install V5R3 and the Linux environment feature
D. Upgrade to an eServer i5 520 and establish a partition
Abc .com with a Model 830 and a FC #5079 1.8M I/O
Expansion tower attached plans to migrate to a new
eServer i5 520. The #5079 has 8.58GB 10K RPM and 17.54GB
10K RPM disk units. The customer is unsure whether
they should migrate the #5079 to the new 520. What
are the configuration considerations for optimum I/O
A. HSL-2, PCI-X adapters, 15K RPM disk units
B. Cross Site Mirroring, HMC, SPD attachment
C. Virtualization, LPAR, hot swappable disk units
D. RAID-5 IOP redundancy, POWER5, rack mountable
Abc .com has an i820 running V5R2, processor feature
#2435 (600 CPW) with interactive feature #1522 (70
CPW). Currently, 50 CPW interactive and 540 batch
CPW are being used. A Webfaced application is being
added that uses 120 CPW. What changes are needed to
meet the new requirements?
A. Upgrade to i5/OS V5R3.
B. Upgrade the processor to feature #2436 (1100 CPW).
C. Upgrade the existing processor interactive feature
to #1524 (240 CPW).
D. Install the Webfacing V5R1 PRPQ to eliminate the
interactive component of Webfacing.
Abc .com is planning two data centers. Each data center
will implement LPAR on an i810 with an OS/400 managing
partition and two OS/400 secondary partitions. How
many OS/400 licenses are required to support these