System x Director v5.2
Questions, Answers, Braindumps (000-079)
The exam is tough but the guide from www.exams.ws
was really helpful.
Q:1A customer is unable to launch the Remote Session
task on an IBM Director Agent running Linux OS. What
is the most likely cause?
A. The SSH port is blocked.
B. The Administrator password is incorrect.
C. DCOM is not installed on the Linux system.
D. IBM Director Agent for Linux does not support the
Remote Session Task.
customer has many SNMP devices which have been discovered
by IBM Director. All appropriate MIS riles are available
on the IBM Director Server and have been compiled
using the SNMP Browser task. However, the customer
sees only the dotted decimal SNMP notation instead
or readable information when using the SNMP Browser
task. What is the most likely source of this problem?
A. The MIB files are in the wrong format.
B. The MIB files are located in the wrong directory.
C. The MIB files have been compiled, but are not loaded.
D. Nothing, since IBM Director shows only dotted decimal
notation for SNMP devices.
IBM Director extension is used to show a visual representation
of a rack of IBM servers?
A. Pack Manager
B. Power Executive
C. Pack Configurator
D. Pack Configuration Tool
the Asset ID Profile Builder, which tab does NOT allow
for any configuration?
customer has installed the External Application Launch
Wizard on a Windows IBM Director Server. The customer
accesses the IBM Director Server from a remote console
and wants to run the External Application Launch Wizard
from this console. Which of the following actions
should the customer perform?
A. Open a Remote Control session to the IBM Director
Server; then, in a command window type "ealwizard"
to start the wizard.
B. Install the External Application Launch Wizard
on the console system. From the Director console select
Tasks External Application Launch Wizard.
C. Open the command prompt on the Director Console
system, map a drive to the IBM Director server Director\Bin
folder and type "ealwizard" to start the
D. The External Application Launch Wizard is installed
as a default when the IBM Director server is installed.
From the Director console select Tasks External Application
customer wants to monitor applications on managed
objects running a Linux OS. Which IBM Director task
would be used to monitor this?
A. Capacity Manager
B. Hardware Status
C. Resource Monitors
D. Process Management