HP Integrity Server Multi-OS Installation and Deployment
Questions, Answers, Braindumps (HP0-P10)
This braindumps will be helpful to you. Try it.
Which methods of accessing the Offline Diagnostics
Environment (ODE) utilities does HP recommend? (Select
A. from the HP service partition
B. from the EFI Boot Menu
C. from the MP command menu
D. from the operating system disk
E. from the Offline Diagnostic Utility CD
ANS A, E
You have run an Offline Diagnostics Environment (ODE)
utility. What should you do before booting the operating
system or running any non-ODE utility?
A. Reset the system at the MP:CM> prompt.
B. Use the MP:CM> poff command to power off the
C. Reset the system at the EFI shell prompt and disconnect
the AC power for one minute.
D. Reset the system at the EFI shell prompt, use the
MP:CM> pc command to power off DC voltage, and
disconnect the AC power for one minute.
You have limited access to the Management Processor
(MP), but you have full access to the system Baseboard
Management Console (BMC). Which command do you issue
in the BMC Command Line Interface (CLI) to power off
the system hardware?
A. cli> p 0
B. cli> rs 1
C. cli> pc 0
D. cli> loc 0
In a Linux environment, what is one of the components
used to manage highly available solutions offered
by Virtual Server Environment (VSE)?
A. HP Workload Manager
B. HP OpenView Node Manager
C. HP Global Workload Manager
D. Performance Management Pack
Your customer has an Integrity rx4640 server running
HP-UX 11i. Which command do you use to perform a minor
setting change to the auto boot file located on the
A. set auto
B. edit auto
C. boot auto
D. config auto
Which components are used in a Virtual Server Environment
(VSE)? (Select three.)
A. Capacity Advisor
B. Operations Manager
C. Data Collector Agent
D. Virtualization Manager
E. Global Workload Manager
F. Performance Management Pack
ANS A, D, E
Fault management events can be viewed directly on
a server as they occur. Which HP tool aggregates information
from multiple systems in the data center?
A. Event Monitoring Service (EMS)
B. Systems Insight Manager (HP SIM)
C. Offline Diagnostics Environment (ODE)
D. OpenView Storage Area Manager (OVSAM)
Which EFI command provides information about the current
state of the processors?
A. sysmode cpu
C. pdt cpu
D. state cpu
You need to update the system firmware on an Integrity
rx2620 server running Windows Server 2003. How could
you perform the update? (Select two.)
A. Boot from a created firmware CD media.
B. Use the TFTP download option in the EFI Shell.
C. Prepare a USB device with the required firmware
D. Run FWUPDATE from the Microsoft Windows Server
console command prompt.
ANS A, C