HP ProCurve Combined Security and Mobility
Questions, Answers, Braindumps (HP0-759)
to all, Thanks to www.examcheets.com for helping me
in such a manner. I purchased their study material
and got through the exam.
You are the administrator of a wireless LAN built
with ProCurve 520wl's. One of your wireless users
calls and informs you that he cannot connect to the
wireless network in his office. When you arrive at
his location, you notice that the access point that
services this section of the building is illuminating
an amber power LED and no other LEDs are lit. Why
can't he connect to the wireless network?
A. The cards installed in the access point are incompatible
with the current firmware image
B. The access point has a corrupt firmware image
C. The access point is rebooting
D. The access point's radio card has been disabled
You want to limit management of your 5304xl switches
using IP Authorized Managers. You have configured
an IP Authorized Manager entry of 10.1.10.4 255.255.255.248.
How many IP addresses will be allowed to manage your
A customer wants to provide stricter access security
for all network clients and implement a combination
of 802.1X and MAC authentication. Which parameters
must be configured on the RADIUS server to support
the ports configured with MAC authentication? Select
A. Configure PAP to support unencrypted authentication
of network peripherals.
B. Create a user on the RADIUS server using the MAC
address of the device for the username and the password.
C. Create a user on the RADIUS server using the MAC
address of the device for the username and the RADIUS
shared secret for the password.
D. Configure EAP RADIUS for the authentication method.
E. Create a user on the RADIUS server using the MAC
address of the device for the username and do not
configure a password (leave it blank).
F. Configure CHAP RADIUS for the authentication method.
You have implemented a network security solution for
your client based upon the 802.1X protocol using the
ProCurve Access Control Client, 2650-PWR switches
and the Funk Steel-Belted RADIUS server. In this solution,
the RADIUS server is acting as a ________.
A. policy repository
B. policy decision point
C. network access server
D. policy enforcement point
You have a new customer who is very concerned about
the security of his internal campus network. You suggest
that the HP ProCurve Access Control Solution may provide
the level of safety and security that he is looking
for. Which options are part of the HP ProCurve Access
Control Solution? Select THREE.
A. Web Authentication
B. Intrusion Detection Systems
C. Hardware Firewalls
D. Access Control Lists
E. 802.1X Authentication
F. Virtual Private Networks
G. Anti-Virus Software
A pharmaceutical company has recently moved into a
new three-story office building. They are sharing
a core routing switch between two departments: human
resources, and research and development. Both departments
have edge switches deployed and neither department
wants the other to have management access to their
respective HP ProCurve edge switches. Which security
measures would be recommended to limit management
access to the respective departments? Select TWO.
C. Authorized IP Managers
D. management VLANs
E. Microsoft Windows User Domain Security limits
In designing a wireless network, the customer needs
to have wireless coverage in their warehouse facility
for the automated picking and bar-coding inventory
system. The warehouse is a wide open space filled
with tall, multi-bay steel racks that are filled with
an inventory of large metal pumps and valves. To get
sufficient coverage down these long aisles, which
antenna would you recommend?
A. omni-directional mast
B. parabolic dish
C. directional patch
D. omni-directional dipole
A customer has asked you to design a wireless network
for his office using HP 420 Access Points. In one
area you decide to use a directional antenna to ensure
that the wireless signal propagates down a long hallway.
If you wish to limit the radiated power to 1 Watt,
what is the highest gain directional antenna that
you can use if the access point it is connected to
is transmitting at full power?
A. 2 dBm
B. 6.5 dBm
C. 10 dBm
D. 14 dBm