Networked Storage – CAS Implementation
Questions, Answers, Braindumps (E20-370)
Today cleared, I prepar it fromwww.examcheets.com
I had no probs in my test.
1-What is the maximum number of nodes in a Gen 4
Q: 2-What is an "unbundled" cluster?
A. Flexible solution where the customer chooses
any configuration of hardware or software to deploy
B. Hardware only solution where the software is
provided by the customer
C. Software only solution where the hardware is
provided by the customer
D. Solution where the customer provides the rack
in which the cluster is installed
Q: 3-What does SDK Failover enable with the default
A. If a C-Clip cannot be found on the primary cluster,
then the request goes to the secondary cluster
B. If the communication is interrupted to the primary
Centera, all data is rewritten to the secondary
C. If the pool has reached its defined quota then
data is written automatically to the default pool
D. In case of a disk failure, data is written automatically
to a node connected to the other power rail
Q: 4-A new customer has been testing their Centera
in Governance mode. They have specified retention
periods ranging from 0 days to 7 years. They would
now like to erase the cluster and put it into production.
How can the customer remove the test data from the
A. Customer can issue a reset cluster command from
B. Customer can switch the cluster off for 24 hours
to delete all data
C. Customer can use the privileged delete command
to remove the data
D. Can not be done. data remains on the cluster
Q: 5-With which enterprise backup solutions does
A. NDMP compatible systems
B. NDMP systems with DMA capabilities
C. Systems capable of mounting a UNIX file system
D. Systems capable of mounting a windows file system
Q: 6-Which protocol is used by the Centera SDK to
interact with the Centera cluster?
A. Fibre Channel
Q: 7-A customer wants to start a backup set on January
31, 2006 at Sam. What is the correct syntax to specify
this parameter in the configuration file?
A- BEGINTIME='2006-01-31 05:00'
B. FIRSTCLIPDATE='2006-01-31 05:00'
C. STARTTIMFSTAMP='2006-01-31 05:00'
D. BEGINTIMEPERIOD='2006-0 1-31 05:00'
Q: 8-What is the maximum number of Centera clusters
that can be monitored in a domain?
Q: 9-How can a customer view the status of their
CE+ Centera cluster?
A. Attach a screen & keyboard directly to switch
B. Attach a screen and keyboard directly to the
C. Use Centera Monitor
D. Use Centera viewer to attach through an access