REAL QUESTIONS SUBMIT MATERIAL ADVERTISE
Braindumps

Microsoft

Cisco

Citrix

CIW

CompTia

CWNA

Apple

Adobe

HP

Legato

Exin

Filemaker

Brocade

Ericsson

TIA

Veritas

ISEB

SCP

IISFA

ISM

OMG

Apc

Mile2

Foundry

Huawei

McData

Symantec

TeraData

RedHat

Solar Winds

Blue Coat

Riverbed

 

 
 
Click on name of dumper to view the dump
 
John Worth
 
 

 

Braindumps of 922-109
Communications Server 1000 Rls.6.0 BARS/NARS

 

Thanx to Examcheats.net for providing helpful material.


QUESTION NO: 1
With Communication Server 1000 Rls. 6.0, Zone Based Dialing is supported for both public and private dial and numbering plans for on-net calls. Which statements best describe Zone Based Dialing? (Choose two.)
A. For outgoing trunk calls, CLID is converted to E.164 format when DIALPLAN is configured as PUB, for PRV type - CLID remains as is.
B. On-net Calls are routed using each CS 1000 site dial plan database and are routed to the remote system to process.
C. Private and Public (E.164) dial plans and features are not retained. Zone Based Dialing uses the Flexible Dial Plan information to route network-wide.
D. A new Zone type, Numbering Zones, provides a user interface to configure the parameters for: Zone-based Parameters, Flexible Dial Plan, and Direct Inward Dial number.
ANS: A,D


QUESTION NO: 2
A switch, such as the Meridian 1, Communication Server 1000 or Business Communications Manager is connected to an ESN Node via TIE trunks but is not equipped with NSIG software and unable to send NCOS or FRL amounts. Which type of switch is this referred to?
A. ETN Switch
B. Virtual Location
C. Satellite Location
D. ConventionalMain
ANS: D


QUESTION NO: 3
The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation. Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?
A. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be designated as a satellite route.
B. Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
C. Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling.
Route must be designated as a satellite route.
D. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)
ANS: A


QUESTION NO: 4
The Network Signaling (NSIG) feature provides the required signaling protocol to interface Meridian 1 or Communication Server (CS)1000 ESN Nodes with Meridian 1 or CS 1000 ESN Mains, Meridian 1 or CS 1000 ESN Nodes, Conventional Mains and ETN Switches. When the NSIG feature is equipped at a switch, options are available to define the signaling arrangements between that switch and any other switch connected to it via TIE trunks. These options define what call information is received from or transmitted to a connected switch. Which type of Network Signaling arranges a TIE trunk group for ESN with Network Transfer (NXFR) and supports Satellite Link Control?
A. ETN
B. ESN3
C. ESN2
D. STD
ANS: B


QUESTION NO: 5
In an IP Peer Networking environment on the Communication Server (CS) 1000, what functionality does the Network Routing Service (NRS) provide?
A. replaces the basic networking parameters defined in BARS/NARS
B. providestranscoding functionality for IP to TDM and TDM to IP calls
C. centralized management of a single network dialing plan for SIP, H.323 and mixed SIP/H.323 networks
D. sychronizes system configuration and database between Call Server and the Signaling Server
ANS: C


QUESTION NO: 6
Which functionality do TIE trunks provide?
A. connects a telephone companies' central office and the PBX of a customer
B. connects two different PBXs, whether in the same building or further away
C. allows an outside caller to dial a station on a PBX directly
D. provide incoming or outgoing service only, and not a combination of incoming/outgoing connections
ANS: B


QUESTION NO: 7
With Automatic On-Net to Off-Net Overflow, if all on-net facilities such as TIE trunks between locations are busy, NARS can convert a dialed UDP number to a Listed Directory Number of the applicable DID number at that location and use off-net facilities, such as CO trunks, to complete the call. When provisioning Automatic On-Net to Off-Net Overflow, which parameter is not correct?
A. Only one Listed Directory Number can be defined per Location Code (LOC)
B. Multiple NPAs per Location Code are allowed
C. Multiple NXX codes per Location Code can be defined
D. Multiple ranges of DNs within each NXX per Location Code can be defined
ANS: B


QUESTION NO: 8
The Communication Server (CS) 1000 VoIP network architecture uses a Gatekeeper. Which function does the CS 1000 Gatekeeper provide?
A. Receives call setup requests.
B. Converts one media stream to another, such as voice packets to analog.
C. Functions as a server and client to make requests on behalf of other clients.
D. Performs address translation and admission control.
ANS: D

922-109



 

 

 

Braindumps Real exam questions and verified answers - 100% passing guarantee - cheap prices.

 

Free brain dumps Braindumps, notes, books for free

 

Braindumps and Exams - Instant download real exam questions - Passing guarantee.

Follow us on FaceBook
Braindumps on Facebook
 
 
 
 
 

CheckPoint

Linux

Novell

DB/2

Network Appliance

EC-Council

Nortel

McAfee

Juniper

ISACA

PMI

Sybase

EMC

HDI

SNIA

ISC

Sair

IBM

Lotus

Exam Express

3COM

BICSI

DeLL

Enterasys

Extreme Networks

Guidance Software

Computer Associates

Network General

SAS Institute

Alcatel Lucent

SeeBeyond

TruSecure

Polycom

Hyperion

Hitachi

Nokia

Fortinet

Vmware

Fujitsu

Tibco

Intel

PostgreSQLCE

BusinessObjects

RESSoftware

BlackBerry

AccessData

ICDL

Isilon

SAP

The Open Group

ACSM

Altiris

Avaya

Cognos

F5

Genesys

SDI

ACI

ASQ

Google

H3C

HIPAA

HRCI

SOA

IIBA

Zend