Succession 1000/1000M Rls. 3.0
Questions, Answers, Braindumps (920-442)
to all dumpers for providing dumps. Here is my contribution.
Abc .com wants to implement a Succession 1000 Rls.
3.0 system for their two sites. As part of the network
planning and design strategy, the Embedded LAN (ELAN)and
Telephony LAN (TLAN) need to be designed. The ELAN
is a 10Base T management LAN. The TLAN is a 100base
T full-duplex LAN. A BayStack 470-48T switch has been
installed to connect the required devices to the TLAN
and ELAN with separate Virtual LANs (VLANs) established
for the TLAN and ELAN. What is required to correctly
connect the TLAN and ELAN for this system? (Choose
A. Define the TLAN and the ELAN in the same subnet
on the network.
B. Connect the Signaling Server(S) and voice Gateway
Media Card(s) on the ELAN VLAN.
C. Define the TLAN and ELAN in separate subnets on
the network while keeping the subnets isolated.
D. Connect the TLAN and ELAN in separate subnets on
the network while
E. Define the TLAN and ELAN in separate subnets on
and allow routing between the TLAN and Elan subnets.
F. Connect the Call Server, Media Gateway SSC, Signaling
Server(S), and Voice Gateway Media Card(s) on the
G. Connect the Call Server, Media Gateway Small System
Controllers (SSC), Signaling (SSC), Signaling Server(s),
and Voice Gateway Media Card(s) on the ELAN VLAN.
Abc .com plans to implement a Succession 100M Rls.
3.0 system for their two for their two sites. The
Main office is configured with a Succession 1000M-Cabinet
for 700 users an the remote location with Succession
Branch Office (BO) for 250 users. The Man Office is
a four-cabinet configuration; they are configured
as Survivable, with one Signaling Server. The BO will
have a Signaling Server and a Media Gateway. These
two location will be connected through the WAN. They
have a concern about call processing reliability should
there be a Call Server failure. What is the recommended
solution for a Call Server backup in case of a failure?
A. Configure an Alternate Signaling Server.
B. Configure an Alternate H.323 Gatekeeper.
C. Configure one Cabinet as an Alternate Call Server
D. Configure the Signaling Server at the BO to have
an Alternate Call Server IP address.
Abc .com has a main office using a Meridian 1 Option
11C Rls. 24 system and is planning to open a branch
office using a Succession 1000 Rls. 3.0 system. In
addition, to the usual telephone features they want
to enable management for both telephony systems. In
addition to upgrading the Meridian 1 Option 11C to
Succession 1000M-Cablnet Rls. 3.0 with appropriate
Voice Gateway Media Cards (VGMC), what should you
recommend for the Succession 10003.0 Rls. System deployment?
A. Install Meridian Admin Tools (MAT) at the main
B. Install Optivity Telephony Manager (OTM) at the
C. Provide Symbol 802.11 wireless handsets for managers.
D. Install 802.11 Access Points to support wireless
E. Replace the managers' digital telephones with i2004
F. Provide i2005 Software Telephones and USB headsets
for the managers.
Abc .com has a Succession 1000 Rls. 3.0 system deployed
at site A and site B.
They have just implemented a call center with 100
agents at site A and have installed Symposium Express
Call Center 4.2. They have a third party voice mail
system installed, as well as a third party database
to story customer data. They want to deliver customer
data from their third party database to their agent's
screens on incoming calls, keyed on the number that
the customer is calling from.
Which two recommendations should you make to satisfy
the customer needs? (Choose two.)
A. Install Symposium Agent 2.3.
B. Install Symposium Web Client 4.0.
C. Install Symposium Web Center Portal 3.0.
D. Upgrade to Symposium Call Center Server 4.2.
E. Install Symposium TAPI Service Provider 2.3.1.
F. Replace the third-party voice mail system with
Call Pilot 2.0.