Communication Server 1000 Rls.5.0 IP Networking Design
Answers, Braindumps (920-330)
Submitting dumps with some changes. The original is
also available in www.brain-dumps.com.
A design engineer needs to assess the network connections
for the installation of a Communication Server (CS)
1000E Standard Availability (SA) Rls. 5.0 system.
One of the important aspects is having different network
ports available for TLAN and ELAN connections. Which
hardware component needs access to both a TLAN and
an ELAN connection?
A. Call Server
B. Signaling Server
C. Third-party H.323 Gateway
D. Media Gateway 1000 Chassis
A customer is deploying a Communication Server (CS)
1000E Standard Availability (SA) Rls. 5.0 network.
Which network device should you use to create routed
VLANs for the VoIP traffic, management, and signaling
A. Shared hub
B. Layer 2 switch
C. Layer 3 switch
D. Signaling Server
A customer has two office locations (sites A and B)
that require a Communication Server (CS) 1000 Rls.
5.0 solution. Site A will have a CS 1000M Rls. 5.0
system with 500 IP Phone users, and site B will have
a CS 1000M MG Rls. 5.0 system with 600 IP Phone users.
The sites are 15 kilometers (9 miles) apart. The customer
requires redundancy for IP Clients across the systems.
Which redundancy configuration could provide this
A. Campus Redundancy
B. Signal Server Redundancy
C. 1 + 1 Geographic Redundancy
D. Controlled Load-Sharing Configuration
A customer has deployed a Communication Server (CS)
1000E Rls. 5.0 system for its main office. The system
includes one Signaling Server, one Call Server, and
two IP Media Gateways. The customer also plans to
open a branch office with 200 seats. Which additional
component(s) would be required?
A. a Survivable Remote Gateway 50
B. a Survivable Remote Gateway 400
C. a Media Gateway 1000B and a Call Server
D. a Media Gateway 1000B and a Signaling Server
With consideration to a deployment decision, which
feature is the main difference between a Media Gateway
1000B Rls. 5.0 and a Survivable Remote Gateway?
C. WAN deployable
D. PSTN Trunking in Network
Which two statements most accurately describe the
functions of the available Survivable Remote Gateway
A. During normal mode operation, IP Clients are controlled
by the Main Office Call Server.
B. During local mode operation, IP Clients may have
access to the PSTN and emergency services.
C. The base configuration for available SRG solutions
provides the ability to support digital telephones.
D. If a WAN failure occurs, IP Phones connected to
the SRG must manually be switched to local mode.
Answer: A, B