Contivity VPN Switch Release 5.0
Answers, Braindumps (920-232)
the exam yesterday. All the questions were from exams.ws
study material. I got 92 % marks. That’s sufficient
for me. I am satisfied with it.
I hereby submit some questions.
You are tasked to set up an asymmetrical branch office
tunnel that will accommodate branch offices and home
offices that connect to the central office Captivity
using DSL/cable Modem. How should you configure the
configuration parameter to accomplish this task? (choose
A. Set the statically addressed end as initiator
B. Set the dynamically addressed end as imitator
C. Set the statically addressed end as responder
D. Set the dynamically addressed end as responder
When upgrading to the Contivity 5.0 code, which statement
A. The code upgrade is uploaded to the Contivity and
automatically takes effect after a reboot.
B. The code upgrade is uploaded to the Contivity MANUALLY
APPLIED, AND TAKES EFFECT AFTER A REBOOT
C. The code upgrade is uploaded to the Contivity manually
applied and takes effect without a reboot.
D. The code upgrade is uploaded to the Contivity and
takes effect immediately after the upload is complete
You want a PC user on a Contivity 5.0 system to pass
IPX traffic through a client tunnel. The traffic must
be encrypted. What can be enabled to accomplish this?
You are tasked to perform backups on a Contivity 5.0
system. What tool should you use to accomplish this
A. Use a backup diskette to perform the backup
B. Use a recovery diskette to perform the backup
C. Use a designated FTP server to perform the backup
D. Use a designated TFTP server to perform the backup
You want a PC user to pass IPX encrypted traffic through
a client tunnel. What tunnel type must be enabled
to accomplish this?
You have just experienced a hard disk failure on a
contivity Gateway equipped with a floppy drive. You
have completed the following steps.
* replaced the hard disk
* inserted the recovery diskette into the floppy drive.
* Pressed the reset button at the back of the unit
and waited for the system to reboot
* Connected to the management IP address
Using the web browser screen, what is the first recovery
step that you would select next?
A. Perform file maintenance
B. Reformate the gateway hard disk
C. Restore the factory default configuration
D. Apply a new software version to the gateway
Which CLI command should the support the engineer
use to verify the current configuration settings on
A. show config
B. show current-config
C. show running-config
D. show config interface
You need to verify a configuration parameter on a
Contivity system . Users can not authenticate using
the Contivity system via RAIUS. The Contivity is configured
to point to a RADIUS server. Which configuration parameters
should you verify on the Contivity system? (Choose
A. Verify that the Group ID is correct
B. Verify that the Group timeout is set to 1
C. Verify that the Group Password is correct
D. Verify that the Group timeout setting is correct
Abc .com enables the Stateful Firewall feature on
the Contivity 5.0 system. What is known about the
A. Interface filters are set by default to deny tunnel
B. Non-tunneled traffic is disallowed but tunnel traffic
C. Tunneled traffic is disallowed but non-tunneled
traffic is allowed
D. All non-management traffic is disallowed until
the rules are configured