Exam Questions, Answers,
920-159 cleared, thanks
to www.4exam.com. The guide from this site was based
on actual exam questions.
1: A site has a CallPilot
server interworking with a Symposium server. Where
are the applications (announcement service, menus,
etc.) stored to support Symposium to CallPilot integration?
A. in a folder
B. in a mailbox
C. on the C drive
D. by a backup file
2: A site has a CallPilot 3.0 server. Which two administrative
functions support the web-based CallPilot Manager
administrative application? (Choose two.)
A. Managing system configuration and backups
B. Creating application with Application Builder
C. Managing mailbox Users, groups, and permissions
D. Managing CallPilot Simple network Maintenance Protocol
3: When provisioning the Embedded Local Area Network
(ELAN) on a CS 1000 system for a site with a CallPilot
3.0 system with 96 DSO channels, what number should
you set the maximum number of call registers for CSL
input (CSQI in LD 17)?
4: Abc .com has a CallPilot 3.0 configuration connected
to a Meridian 1. the CallPilot platform connect to
the network loops in the IPE shelf through MGate cards.
The MGate cards plug into the Meridian 1 IPE shelf.
Which three platform types connect using the Mgate
card? (Choose three.0?
5: Which three CallPilot features are supported by
Business Communication Manager (BCM) 3.0? (Choose
A. ability to annotate faxes
B. ability to save voice messages
C. ability to reject passwords (such as 888888)
D. ability to set message sensitivity to urgent or
6: When installing a 40-channel CallPilot 3.0 system
using a 201i server and a CS 1000 system, how do you
connect the SCSI connection to the server?
A. The SCSI connection to the 201i server is made
with the low profiles right-angle SCIS connector on
the SCIS connector on the 201i server faceplate.
B. NTRH3502SCSI cable attached to the SCSI connection
to the 201i server is made with the CD-ROM drive SCSI
cable NTRH1408 attached from the SCIS connector on
the 201i server faceplate to the SCSI adapter A0763912
on the CD-ROM drive
C. NTRH3502SCSI cable attached to the SCSI connection
to the 201i server is made via the backplane connector
in the Media Gateway or Media Gateway Expansion with
the multi I/O cable (NTRH0912) to the next drive in
the SCIS chain.
D. NTRH3502SCSI cable attached to the SCSI connection
to the 201i server is madewith the intermediate SCIS
cable NTRH1408 that connect from the SCIS connector
on the 201i server faceplate to the I/O panel connector
and the NTRH410 SCSIcable that connect from the I/O
panel connector to the next device in the SCSI chain.
7: When installing a 40-channel 3.0 system using a
201i server and a Meridian 1 Option 11C mini switch,
how should you set the SCSI ID on the Tandberg SLR5
tape drive (NTRH9038)?
A. Rotate the dial on the SCIS ID rotary switch unit
the arrow points to 3.
B. Use the blade of a screwdriver to press either
the plus (+) or minus (? Button the SCSI ID switch
to set the SCIS ID to 5.
C. Use the blade of a screwdriver to set DIP switches
as follows. 1=ON, 2=off, 3=Off, 4=Off, 5=Off
D. The SCSI ID for the Tandberg SLR5 tape drive (NTRH9038)
is set when you run the Configuration Wizard after
you install the CallPilot system.