Answers, Braindumps (920-133)
is provided with ratings from different students. I
used www.examcheats.net study material and the exam
was not a problem for me.
To monitor the performance of a BayStack switched network,
way would you use Optivity Network Management System
(ONMS) OmniView instead of java Device Manager (JDM)?
A. Omni View supports RMON while JDM does NOT
B. JDM is incapable of supporting the BayStack BPS switch
while OmniView supports it.
C. JDM works with individual network components wile
OmniView work with subnets and LAN segments.
D. OmniView can present statistics in both graphical
end tabular formats while JDM only supports tabular
Abc .com needs to implement QoS settings on their bayStack
switches. They have recently installed an Optivity Policy
Server (OPS) and want to use the Common Open Policy
Services (COPS) to provide consistent policies across
the network. Which switches support the COPS protocol
for provisioning (COPS-PR) to allow the policies to
be downloaded to be switches? (Choose two.)
A. BayStack 425
B. BayStack 450
C. BayStack 460
D. BayStack 470
E. BayStack 5510
Answer: C, D
When using the Port Mirroring feature of the BayStack
425-24T, which statement represents the capability of
the BayStack 425-24T?
A. It can monitor only one egress port.
B. It can monitor only one ingress port.
C. It can monitor only one MAC address.
D. It can monitor only ingress and egress port.
Abc .com with a BayStack 5510 switch wants to monitor
all traffic received by port 25 and transmitted port
24. Using the Console interface (CI) Menus, which port
mirroring, monitoring mode should be used? Assume that
Port 24 is Y and Port 25 is X.
A. Port X ->
B. -> Port.
C. -> Port X or Port ->
D. -> Port X and Port ->
When initially configuring a BayStack 470-48T switch
it is necessary to complete the following tasks:
* Send the Simple Network Management Protocol (SNMP)
traps to an Optivity Network Management System (ONMS)
so that the switch can be monitored.
* Use the Console interface (CI) Manus to enter the
SNMP Configuration screen and enter the both and IP
address and a community string to specify a trap receiver.
What is the requirement for a community string when
defining a trap receiver?
A. It must be the Read Community string for the BayStack
B. It must be the Read-Write Community string for the
BayStack 470-48T switch.
C. It must be a community string that has been defined
on the ONMS for the BayStack 470-48T switch.
D. It must be the Read-write community string that has
been defined on the ONMS for the BayStack 470-48T switch.
Abc .com with BayStack 470-48T switch is monitoring
outgoing frames on a full-duplex port that is a MultiLink
Trunk (MLT) member. They are using the port-based mirroring
mode and suspect that all frames are NOT being displayed.
To display all frames in this configuration, which action
should be taken?
A. Use the MAC address-0based port mirroring mode.
B. Enable the internet Group Management Protocol (IGMP)
C. Use the port mirroring configuration: anything <->
port X. Assume X is the port being monitored.
D. Use the port mirroring configuration: anything <->
port X and Port Y <->. Assume X is the port being
Port-based VLAN 10 has been configured on a standalone
BayStack 470-48T switch. Port 5 must now be added to
VLAN 10. Using the Web-based Management System interface,
what are the necessary steps to add port 5 to VLAN 10?
A. From the main menu, choose configuration > Port
Management. In the row for Port 5, choose VLAN 10 in
the VLAN Member column. Finally, click Submit.
B. From the main menu, choose configuration > VLAN
in the VLAN Table section, click the Modify icon for
VLAN 10. Now choose Port 5 from the table and click
C. From the main menu, choose Application > VLAN
> Port Information. They choose port 5 and enter
VLAN 10 in the VLAN 10 in the VLAN Port information
Table. Finally, click Submit.
D. From the main menu, choose Application > VLAN
> VLAN Configuration. In the VLAN Table section,
click the Modify icon for VLAN 10. now choose Port 5
from the table, and click Submit.
Which statement is false when comparing the features
of the BayStack 470 and BPS switches?
A. They both support SNMP version 3.
B. They both support MultiLink Trunking (MLT).
C. They both have built-in stacking connectors.
D. They both support a maximum of 256 VLANs.
E. They both support up to eight Single Trunk Groups