Network Appliance Implementation Engineer-SAN
Thanx to www.examcheats.net for providing questions
Q NO: 1
Which license do you have to install on the NetApp appliance
in order to use SnapDrive?
A. Cluster License
B. FCP License
C. NFS License
D. CIFS License
Q NO: 2
Soft zoning is implemented using the switch's nameserver.
(True or Flase)
Q NO: 3
If you plan to use the HBA for SAN booting, which utility
must you use to configure the LUN as a boot device?
A. HBA Management Utility LightPulse
B. Fabric Manager
C. HBA BootBIOS
D. Operations Manager
Q NO: 4
What would you use to share a data LUN among multiple
servers where each server has simultaneous write access?
A. Host-based clustering
B. Host-based multipathing
C. Host-based clustered file system
D. Host-based volume manager
Q NO: 5
At which level can space reservations for a LUN be managed?
Q NO: 6
Which command on a Brocade 4100 is used to display the
current zone configurations?
Q NO: 7
What type of zoning is based on World Wide Port Name?
Q NO: 8
A costumer has a 4-node SUN cluster configuration and
each node has 2 dual-ported HBAs. What is the minimum
number of igroups that need be created to map a LUN
to the cluster?
Q NO: 9
Which utility on Windows 2003 could be used to collect
information about firmware and driver versions for an
Emulex LP10000 HBA?
C. Fcp config
Q NO: 10
SnapDriver for UNIX requires RSH access to the NetApp
storage controller. (True or False)
Q NO: 11
When zoning by World Wide Node Name (WWNN) is deployed
and a host HBA is replaced, no zone changes need to
be made. (True or False)