REAL QUESTIONS SUBMIT MATERIAL ADVERTISE
Braindumps

Microsoft

Cisco

Citrix

CIW

CompTia

CWNA

Apple

Adobe

HP

Legato

Exin

Filemaker

Brocade

Ericsson

TIA

Veritas

ISEB

SCP

IISFA

ISM

OMG

Apc

Mile2

Foundry

Huawei

McData

Symantec

TeraData

RedHat

Solar Winds

Blue Coat

Riverbed

 

 
 
Click on name of dumper to view the dump
 
Francesco
 
 

Braindumps of 74-134

Pre-installing Microsoft® Products and Technologies

 

Exam Questions, Answers, Braindumps (74-134)

The exam is tough but the guide from www.exams.ws was really helpful.

 

Question: 1

You are a system builder at Company.com. Your network uses a Microsoft Windows Server?

2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a

technician computer. You installed OPKTools from Microsoft Windows? XP Service Pack 2. You

want to set a static Internet Protocol (IP) address for the Microsoft Windows Preinstallation

Environment on the computer that you are installing for your customer. During the preinstallation

process, you receive the following error message: Cannot Authenticate to Server. What should

you do? (Each correct answer presents part of the solution. Choose two.)

A. Edit the winbom.ini file in the WinPE.net section to include the Gateway= parameter.

B. Edit the winbom.ini file in the WinPE.net section to include the StartNet= parameter.

C. Edit the winbom.ini file in the WinPE.net section to include WinPEFirewall=On.

D. Edit the winbom.ini file in the WinPE.net section to include the IPConfig= parameter.

Answer: A, D

Question: 2

You are a system builder at Company.com. Your network is using a four-port router that is

running the Dynamic Host Configuration Protocol (DHCP) service. Your technician computer runs

Microsoft Windows? 2000 Professional and is connected to the four-port router. You have

installed a media reader card in a computer, and you use OPKTools to preinstall this computer

over the network. In Audit mode you discover that the media card reader device has failed and

that it is not enumerated in Device Manager. You need to preinstall your computers with this card

reader. What should you do? (Each correct answer presents part of the solution. Choose two.)

A. Add the DriverSigningPolicy=Ignore parameter in the Unattended section of the unattend.txt

answer file to preinstall the unsigned driver.

B. Remove the incorrect driver that was installed.

C. Add the DriverSigningPolicy=Warn parameter in the Unattended section of the unattend.txt

answer file.

D. Obtain an updated driver (if one exists) from the manufacturer.

E. Run sigverif.exe from a command prompt to verify that all the drivers are signed.

F. Add the DriverSigningPolicy=Block parameter in the Unattended section of the unattend.txt

answer file.

Answer: A, D

Question: 3

You are a system builder at Company.com. Your network is using a four-port router that is

running Dynamic Host Configuration Protocol (DHCP). Your technician computer runs Microsoft

Windows? 2000 Professional and is connected to the four-port router. You have created a

configuration set by using OPKTools. When you attempt the preinstallation on a new computer,

you find that the hard drive is not formatted correctly. You open the winbom.ini answer file in the

configuration set, and you see the following:

[Disk1.config]

Size1 = *

PartitionType1 = PRIMARY

FileSystem1 = NTFS

QuickFormat1 = YES

You need to perform an unattended preinstallation of Microsoft Windows on three new computers

that you are shipping to customers. What should you do? (Each correct answer presents part of

the solution. Choose two.)

A. Add Wipe Disk=Yes to the winbom.ini answer file.

B. Add SetActive1=Yes to the winbom.ini answer file.

C. Change Size1=* to Size1=10000 in the winbom.ini answer file.

D. Change QuickFormat1=YES to QuickFormat1=NO in the winbom.ini answer file.

Answer: A, B

Question: 4

You are a system builder at Company.com. The company network is not functional, and there is

no network access to the technician computer. You need to preinstall Microsoft Windows?

operating systems on three computers. You have three copies of the Windows operating

systems. You have decided to use a winnt.sif file to perform a Windows CD-based preinstallation

on these computers. You manually create a winnt.sif file and copy it to three floppy disks. You

place a CD of each Windows operating system in the DVD drive of each computer. You start

each computer. When you see the initialization screen on each computer, you insert the floppy

disk with the winnt.sif file on it into each computer. Two of the computers are preinstalled

properly. The third computer, however, begins the preinstallation process but stops with the

command prompt window open and the cursor at D:\i386\System32. You need to preinstall the

third computer. What should you do? (Each correct answer presents part of the solution. Choose

two.)

A. Remove the CD from the drive, clean it, and begin the process again.

B. Check the Hardware Compatibility list to make sure that all hardware is compliant.

C. At the command prompt, type ipconfig /all to make sure that Transmission Control

Protocol/Internet Protocol (TCP/IP) is bound to the adapter.

D. Remove the Microsoft Windows OEM Preinstallation Kit (OPK) CD from the DVD drive and

place the Windows operating system CD into the DVD drive.

Answer: B, D

Question: 5

You are a system builder at Company.com. Your network uses a Microsoft Windows Server?

2003 that is running the Dynamic Host Configuration Protocol (DHCP) service and is set up as a

technician computer. You installed OPKTools from Microsoft Windows? XP Service Pack 2. You

run Setup Manager and create a configuration set to install a Microsoft Windows operating

system. You edit the winbom.ini file in the configuration set and copy the winbom.ini file to a

floppy disk. You boot the master computer by using your Microsoft Windows Preinstallation

Environment CD, and you insert the floppy disk with the winbom.ini file. You get the following

error message: Cannot Authenticate to the Server. What should you do? (Each correct answer

presents a complete solution. Choose two.)

A. Verify that the passwords used for connecting are the same in the configuration set and on the

floppy disk.

B. Verify that the Gateway= parameter is included in the winbom.ini answer file.

C. Verify that the StartNet=yes parameter is included in the unattend.txt answer file.

D. Verify that the network interface card in the master computer is plugged in to the crossover

cable.

Answer: A, B

Question: 6

You are a system builder at Company.com. You have a four-port router that is running the

Dynamic Host Configuration Protocol (DHCP) service. You are using a computer running

Microsoft Windows? 2000 Professional as your technician computer. You have created a

configuration set and are using the following winbom.ini file to install the network drivers:

[PnpDrivers]

| \\opktools\drivers\Chipset = Chipset

| \\opktools\drivers\video = video

| \\opktools\drivers\Audio = Audio

| \\opktools\drivers\Modem = Modem

| Username = opk

| Password =

| [PnpDriverUpdate]

| WaitForPNP = YES

| TargetRoot = Windows\OEMdrivers

| UpdateInstalledDrivers = No

When you run the preinstallation, your updated drivers are not installed. You need to install

updated drivers. What should you do? (Each correct answer presents part of the solution. Choose

two.)

A. Include the OEMPnPDriversPath parameter in the PnPDriverUpdate section of the winbom.ini

file.

B. Remove the username and password parameters in the PnPDrivers section. Place them in the

PnPDriverUpdate section.

C. Change the WaitForPnP=Yes parameter to WaitForPnP=No.

D. Remove lines in PnPDrivers section to only include \\opktools\drivers = drivers.

E. In the PnPDrivers section,change UpdateInstalledDrivers=No to UpdateInstalledDrivers=Yes.

Answer: B, E

 

 

Braindumps Real exam questions and verified answers - 100% passing guarantee - cheap prices.

 

Free brain dumps Braindumps, notes, books for free

 

Braindumps and Exams - Instant download real exam questions - Passing guarantee.

Follow us on FaceBook
Braindumps on Facebook
 
 
 
 
 

CheckPoint

Linux

Novell

DB/2

Network Appliance

EC-Council

Nortel

McAfee

Juniper

ISACA

PMI

Sybase

EMC

HDI

SNIA

ISC

Sair

IBM

Lotus

Exam Express

3COM

BICSI

DeLL

Enterasys

Extreme Networks

Guidance Software

Computer Associates

Network General

SAS Institute

Alcatel Lucent

SeeBeyond

TruSecure

Polycom

Hyperion

Hitachi

Nokia

Fortinet

Vmware

Fujitsu

Tibco

Intel

PostgreSQLCE

BusinessObjects

RESSoftware

BlackBerry

AccessData

ICDL

Isilon

SAP

The Open Group

ACSM

Altiris

Avaya

Cognos

F5

Genesys

SDI

ACI

ASQ

Google

H3C

HIPAA

HRCI

SOA

IIBA

Zend