IBM x Series Technical Principles V6
Questions, Answers, Braindumps (000-071)
braindump is provided with ratings from different
students. I used www.examcheets.com study material
and the exam was not a problem for me.
Company. com has the following requirements for an
xSeries server to perform file and print sharing.
* Scalable above two processors
* Up to 4000 users
* Integrated Network Fault Tolerance
* Support for RAID-5 internally
Which of the following will meet the customer's requirements?
D. BladeCenter HS40
What is the maximum number of x346 servers that can
be installed in an IBM NetBAY Enterprise Rack that
includes a 2U Keyboard/Monitor drawer and three PDUs?
Company. com has purchased an xSeries 346 server and
wants to install the ServeRAID-7k option. In which
slot must the adapter be installed?
A. Slot 1
B. Slot 2
C. Slot 3
D. Slot 4
E. Dedicated Slot
The IBM eServer BladeCenter Management Module is inaccessible.
The IP Address is unknown, and the administrator who
configured the BladeCenter is not available. Which
of the following is the best solution to resolve this
A. Replace the Management Module
B. Press the reset button at the bottom of the module
to reset to the default configuration
C. Remove the Management Module and move the IP Address
Reset Jumper to reset to the default configuration
D. Remove the Management Module and pull the battery,
wait 20 seconds, then re-install the battery to reset
to the default configuration
Company. com is planning to make a new server purchase.
They need to provide reports to their management about
how many times the servers have failed and about the
level of service (Service Level Agreement is in place)
that they have provided to the company. Which feature
of IBM Director can assist the customer with these
A. System Monitors
B. Capacity Manager Tool
C. System Availability Tool
D. IBM Software Rejuvination
When planning an IBM Director implementation in respect
to the network topology, what would be the best location
to place the system running IBM Director Server?
A. Place IBM Director Server on the edge of the network
because it is the best location to manage the entire
B. Place IBM Director Server in the middle of the
network topology to avoid, in the event of the failure
of a network component, that IBM Director Server gets
C. Place IBM Director Server in the DMZ because, in
the event of the failure of a security token, it will
be less likely that that IBM Director Server will
D. Place IBM Director Server in the DataCenter because,
in the event of the failure of a fibre channel switch,
it will be less likely that that IBM Director Server
In an IBM Blade Center Enterprise chassis, which two
of the following installed components will occupy
a blade bay?
A. Power Supply
B. BladeCenter HS20 blade
C. HS20 SCSI Expansion option
D. HS20 Fibre Channel Expansion Card
E. BladeCenter Acoustic Attenuation Module
The x336 server has which of the following attributes?
A. A slimline 1U design with three PCI-X slots and
the ability to accommodate hot swap drives
B. 2U rack optimized slimline design with the ability
to accommodate six hot swap hard drives
C. A slimline 1U design, two PCI slots and the ability
to accommodate two hot swap hard drives
D. A slimline 1U design, two PCI-X slots, and the
ability to accommodate two hot swap hard drives
Which of the following is the maximum number of supported
blades and modules that can be accommodated into a
BladeCenter Enterprise chassis, with power supplies
in Power Supply bays one and two?.
A. 6 HS20 Blades with Fibre Channel Expansion Cards,
4 Fibre Switches, 2 Management Modules
B. 6 HS20 Blades with Fibre Channel Expansion Cards,
2 Fibre Switch Modules, 2 Network Switches, 2 Management
C. 7 HS20 Blades with Network Expansion Cards, 2 Fibre
Switch Modules, 2 Network Switches, 2 Management Modules
D. 14 HS20 Blades with Network Expansion Cards, 2
Network Switches, 2 Management Modules
Which three of the following IBM xSeries servers have
the ability to accept an RXE-100 Remote I/O enclosure?
Which two of the following machines utilize the XA-32
Simple Swap SATA allows the drives to be removed and
added to the x206 in which of the following ways?
A. The server must be powered down before a Simple
Swap SATA drive can be replaced.
B. Simple Swap drives are hot pluggable the LSI chipset
manages the array configuration.
C. No action is required in ServeRAID Manager. The
drives can simply be removed and hot swapped from
D. Simple Swap SATA drives can be removed and hot
swapped from an array providing they are disabled
in ServeRAID Manager.