IBM System p5 Virtualization Techincal Support AIX
Answers, Braindumps (000-062)
Hi to all and thanks
to www.exams.ws and www.4exam.com But there’s
no need to have it from both of them, only questions
from only one are sufficient I think. Here is my contribution.
Company.com would like to configure a virtual Ethernet
between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which
of the following options is necessary to complete
A. Remove the physical Ethernet adapters from the
B. Activate Advanced POWER Virtualization
C. Update microcode for the virtual adapters
D. Upgrade AIX V5.2 LPAR to AIX V5.3
Company.com wants to change the resource allocation
for their AIX 5L V5.3 micro LPAR system. What is the
smallest processor allocation than can be moved between
A. A full processor
B. 1% of a processor
C. 10% of a processor
D. 25% of a processor
Company.com has a p5-570 with an application running
on each of three Micro-Partitions. The disk I/O is
shared through a VIO server. A technical specialist
has been asked to upgrade the VIO server. Which of
the following procedures should be taken to maintain
the integrity of the partitions?
A. Shut down all client partitions before updating
the VIO server.
B. Disconnect the client partitions from any IP networks
before updating the VIO server.
C. Update the client partitions to the latest OS maintenance
level before updating the VIO server.
D. Update the VIO server while the partitions are
running, but reboot each client partition at a convenient
time after the update.
A technical specialist defined a virtual Ethernet
ent2 on the VIO server that has a physical adapter,
ent0. Which of the following commands should be used
to configure the Shared Ethernet Adapter?
A. mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid
B. mkdev -virtual ent0 -adapter ent3 -default en2
C. mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid
D. mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid
When planning for a logically partitioned system,
which of the following should be used as part of
a review to ensure that each partition has the required
A. Use the Workload Estimator capacity planning tool.
B. Use prtconf output from legacy systems..
C. Use the LPAR Validation Tool.
D. Use Performance Management Services.
Company.com recently experienced an unanticipated
system outage when the VIO server was upgraded. The
current p5-570 has six Micro-Partitions and a VIO
server partition. How can a similar outage be avoided
in the future?
A. Use DLPAR to avoid an outage.
B. Deploy a redundant VIO server in the POWER5 system.
C. Add additional Host Bus Adapters and Network adapters
to the VIO server.
D. Implement a standby server and move all partitions
to it before applying future updates.
When creating a virtual Ethernet adapter on the HMC
for a VIO server, what is the advantage of checking
the box to access external network (trunk)?
A. Allows the creation of a shared Ethernet adapter
B. Allows the use of VLANs
C. Allows the consolidation of multiple networks on
D. Allows EtherChannel load balancing