REAL QUESTIONS SUBMIT MATERIAL ADVERTISE
Braindumps

Microsoft

Cisco

Citrix

CIW

CompTia

CWNA

Apple

Adobe

HP

Legato

Exin

Filemaker

Brocade

Ericsson

TIA

Veritas

ISEB

SCP

IISFA

ISM

OMG

Apc

Mile2

Foundry

Huawei

McData

Symantec

TeraData

RedHat

Solar Winds

Blue Coat

Riverbed

 

 
 
Click on name of dumper to view the dump
 
Keitaro
 
 

 

Braindumps of HP0-Y12
Building ProCurve Resilient, Adaptive Networks

 

 

Exam Questions, Answers, Braindumps (HP0-Y12)
Thanks to www.exams.ws and www.4exam.com But there’s no need to have it from both of them, questions from only one are sufficient I think.


Question No: 1
You must configure QoS on a ProCurve Switch 8212zl in the core layer of a network. One interface on the switch receives traffic that uses only Layer 3 markers to indicate priority. What must you do to enable the switch to forward this traffic with correct priority?
A. Set the QoS trust level to the appropriate value.
B. Enable the appropriate interpretation of the IP ToS field.
C. Configure port-based priorities for all ports forwarding this traffic.
D. Configure custom IEEE 802.1p maps for all ports forwarding this traffic.
Answer: B
Question No: 2
You will connect an IP telephone that supports LLDP-MED to port 8 on a ProCurve Switch 3500yl. Which configuration step will enable the switch to auto-configure the appropriate VLAN for the phone??
A. Enable LLDP-MED in the VLAN 1 configuration context.
B. Configure port 8 as a tagged member of a voice VLAN.
C. Enable LLDP-MED in the configuration context for a voice VLAN.
D. Define port 8 as an LLDP-MED port in the global configuration context.
Answer: B
Question No: 3
A ProCurve Switch 8212zl must be configured to be the ABR for OSPF areas 0 and 5. While implementing this configuration, you enter the following command at the switch's CLI:
8212zl(ospf)#area 5 stub 2 no-summary
How will this affect the route tables of other routers in area 5?
A. Only directly connected routes will be listed.
B. The only OSPF route will be the interface with the 8212zl.
C. All networks outside area 5 will be summarized as a default route.
D. Every route known to the 8212zl will be listed with a separate gateway and cost.
Answer: C
Question No: 4
You have enabled OSPF in the global configuration context and in the VLAN 222 context of a ProCurve Switch 8212zl. All OSPF areas have been created and associated with the correct VLANs. All other OSPF settings are at default. What is the effect of the following command?
8212zl(vlan-222)#ip ospf cost 100
A. The OSPF link using VLAN 222 as a gateway will use the default cost.
B. The OSPF link using VLAN 222 will become the preferred route to the backbone area.
C. The OSPF link using VLAN 222 as a gateway will have higher cost than OSPF links with a default cost.
D. The OSPF link using VLAN 222 as a gateway will have lower cost than OSPF links with a default cost.
Answer: C
Question No: 5
The output of show ip ospf neighbor for a ProCurve Switch 8212zl indicates a 2WAY state for one of the switch's OSPF neighbor relationships. What does this indicate about the 8212zl and its neighbor?
A. They are in different OSPF areas.
B. They are both BDRs for an OSPF area.
C. They are configured with different OSPF versions.
D. They are neighbors, but have not formed an adjacency.
Answer: D
Question No: 6
What is an OSPF virtual link?
A. a link that connects an ABR to the backbone area through a non-backbone area
B. a link that provides a redundant connection between an internal router and an ABR
C. a link that enables an ABR to exchange routes with a router in another OSPF domain
D. a link that provides a redundant connection between an ASBR and a non-OSPF domain
Answer: A
Question No: 7
How does a ProCurve Switch 5406zl handle two equal-cost OSPF paths?
A. It blocks one of the paths.
B. It shares the load over the two paths.
C. It balances the load per TCP session.
D. It uses the first path that appeared in the routing table.
Answer: B
Question No: 8
What is the impact on memory usage when defining multiple OSPF areas on a ProCurve Switch 5412zl?
A. It is decreased because non-backbone routes are summarized.
B. It is increased because it must maintain more routes in its route table.
C. It is increased because it must maintain link-state databases for each area.
D. It is decreased because all backbone routes are summarized as the default route.
Answer: C
Question No: 9
What are the benefits offered by converged networks? (Select two.)
A. simplified adds, moves, changes
B. unified support for IPv4 and for IPv6
C. lowered costs for switches and routers
D. enhanced quality for voice transmissions
E. integrated support for voice, video, and data
Answer: A, E

HP0-Y12

 

 

 

Braindumps Real exam questions and verified answers - 100% passing guarantee - cheap prices.

 

Free brain dumps Braindumps, notes, books for free

 

Braindumps and Exams - Instant download real exam questions - Passing guarantee.

Follow us on FaceBook
Braindumps on Facebook
 
 
 
 
 

CheckPoint

Linux

Novell

DB/2

Network Appliance

EC-Council

Nortel

McAfee

Juniper

ISACA

PMI

Sybase

EMC

HDI

SNIA

ISC

Sair

IBM

Lotus

Exam Express

3COM

BICSI

DeLL

Enterasys

Extreme Networks

Guidance Software

Computer Associates

Network General

SAS Institute

Alcatel Lucent

SeeBeyond

TruSecure

Polycom

Hyperion

Hitachi

Nokia

Fortinet

Vmware

Fujitsu

Tibco

Intel

PostgreSQLCE

BusinessObjects

RESSoftware

BlackBerry

AccessData

ICDL

Isilon

SAP

The Open Group

ACSM

Altiris

Avaya

Cognos

F5

Genesys

SDI

ACI

ASQ

Google

H3C

HIPAA

HRCI

SOA

IIBA

Zend