NonStop Advanced Networking and Communications
Questions, Answers, Braindumps (HP0-761)
This braindump is provided with ratings from different
students. I used www.examcheats.net study material and
the exam was not a problem for me.
1 Which WAN Access methods support the Synchronous
Data Link Control (SDLC) protocol?
A. ENVOYACP/XF, generalized full duplex, 6100
ADCCP and SNAX/XF
B. ENVOYACP/XF, SNAX/APN, SNAX/XF, and 6100 ADCCP
C. ENVOY, generalized full duplex, 6100 ADCCP and SNAX/XF
D. ENVOY, SNAX/APN, SNAX/XF and 6100 ADCCP
2 A customer has 2000 users that establish occasional
TELNET connections to a user-written Pathway application,
although they need capacity to handle 500 users simultaneously.
They want to run only two TELSERV processes. The terminals
must be static inside Pathway and the customer prefers
not to change their code. When users have been abruptly
disconnected after a network error, other users are
connecting to the previously logged-on sessions. What
recommendation should you make?
A. Change the application to re-authenticate.
B. Configure CALLER on the SERVICE and ASSIGNED on the
C. Change the application to call RECONNECT MODEM and
D. Configure the PATHWAY TERMs to AUTORESTART.
Which SCF command is used to find the CLIP code downloaded
to LINE 0 of CLIP 1 of SWAN Adapter #S34?
A. STATUS TASK $ZZWAN.#S34.1.DLC0
B. STATUS SERVER $ZZWAN.#S34.1
C. INFO SERVER $ZZWAN.#S34.1
D. STATUS SERVER $ZZWAN.#S34.1.DLC0
What is the AMP manager process name for a system that
has an ATM adapter configured and started in CPU 3?
D. to be determined by the configurer.
What is the speed setting of a TRSA adapter if the Speed
LED is OFF?
What is the purpose of the WANFBT tool?
A. To get TCB information from the SWAN CLIP
B. To initiate an online SWAN CLIP dump
C. To force a reboot of a SWAN CLIP
D. To check the status of a SWAN CLIP
Which utility is used to test connectivity to a remote
host by sending a small EDIT file and having it sent
What is the impact of moving a ServerNet cable to another
plug-in card of a ServerNet II switch?
A. The ServerNet cluster for the affected system
must be reconfigured.
B. The Cluster number of the affected system stays the
C. The Expand system number of the affected system is
D. The Cluster number of the affected system is changed.
Which condition could cause a WAN TFTP process to remain
in a STARTING state?
A. SWAN adapter is powered off.
B. TRAPMUX process is not started.
C. WANBOOT process is not started.
D. TCPIP process is not started.