ProCurve Adaptive Edge Fundamentals
Exam Questions, Answers,
I have questions for
you but I have only one suggestion for you to just go
for www.examcheats.net study material.
Try my questions too. You will get the success.
During a planning meeting at Abc .com site, Abc .com
representative mentions that they would like to consider
using the GARP VLAN Registration Protocol (GVRP) to
automate VLAN assignments. Which statement describes
a reason to reject this option?
A. GVRP cannot be used to configure Layer 3 switches
because it is a Layer 2 protocol.
B. GVRP is a proprietary technology that is not supported
by HP Pro Curve switches.
C. GVRP can compromise network security because it enables
users with GVRP-compliant network adapters to set their
own VLAN assignments.
D. GVRP introduces significant network overhead because
of its reliance on broadcasts to propagate VLAN configurations.
While troubleshooting a network outwork outage, you
decide to examine the Event log of an HP Pro Curve Switch
5348xl. Identify the command that filters reports of
normal behavior from the console display.
A. Console events -n
B. Console events critical
C. Console events not-info
D. Console events -c
You are preparing to install cable to support a 1000Base-
T uplink between switches. What is the maximum length
for the cable in this run?
A. 3 meters
B. 100 meters
C. 220 meters
D. 500 meters
While troubleshooting connectivity outages on an HP
ProCurve Switch 5348xl, you decide to issue the show
tech command to obtain a comprehensive report of switch
status. You must first enter the ______ level.
A. Global configuration
D. Port configuration.
You have been assigned to upgrade the firmware on an
HP ProCurve switch. Identify the command will you use
to view a list of all firmware versions stored on the
A. show startup
B. show version
C. show run
D. show flash
The network administrator at Abc .com site asks you
to describe the differences between HP ProCurve Manager
Plus and HP ProCurve manager Plus and HP ProCurve Manage.
Which statements describe feature that you are included
only in HP ProCurve Manager Plus? Select Two.
A. an interface for defining configurations that can
be applied to multiple devices simultaneously
B. an interface for configuration pager alerts when
the application detects unauthorized attempts to access
device management features
C. an interface for tracking and logging configuration
D. an interfaces for determining what types of devices
arte connected to each port on discovered switches
E. maps of VLANs and physical network topology
During a planning meeting for a new HP ProCurve solution,
Abc .com representative asks you to explain the primary
difference between layer 3 switches and layer 2 switches.
Which statement describes this difference?
A. Layer 3 switches can forward traffic using information
in the layer 3 header, layer 2 switches forward traffic
using information in the layer 2 header.
B. Layer 3 switches typically have a higher port density
than layer 2 switches
C. Layer 3 switches can be configured with IP addresses;
layer 2 switches cannot
D. Layer 3 switches are usually placed at the access
layer 2 switches are usually placed at the distribution