Supporting the Enterprise Virtual Array (EVA) Storage
Questions, Answers, Braindumps (HP0-461)
cleared exam yesterday and passes it. It was really
hard. I did not find any dumps for this exam. some
of the questions from exams are there. I thank to
all the dumpers who all sent their braindumps to this
site and helped others
The power switches of HSV2x0 controllers are powered
off without a storage system shutdown. What is the
A. Cache is not flushed and batteries are discharged.
B. Cache is flushed and batteries are not discharged.
C. Cache is flushed and batteries are discharged.
D. Cache is not flushed and batteries are not discharged.
How are enclosure addresses assigned to the HSV controllers
and drive enclosures of an EVA storage system?
A. They are manually configured with Command View
B. They are automatically assigned by position on
C. Thumb wheels on the rear of the enclosure are used.
D. Fibre Channel assigns them automatically.
An entry in the Controller Event log reports that
a "volume is reconstructing". What does
this indicate the HSV controller is doing?
A. redistributing data among all members of a disk
B. initializing a new disk group
C. recreating the data for a missing disk drive
D. rebuilding the metadata on all the quorum disks
What is the Fibre Channel topology of the M5x14 disk
B. arbitrated loop
Which item is NOT a Customer Self Repair component?
A. controller blower
C. controller power supply
D. controller cache battery
You work as a network technician at Company.com. You
are using a 0C6D expansion cabinet with a fully populated
2C12D EVA. How many additional Fibre Channel disks
may be supported in the expansion cabinet?
Which statements about the FC-AL switch model 310
correctly describe its functional characteristics?
A. Using Fibre Channel loop switches eliminates the
need for expansion panels in the racks.
B. After the first drive enclosure is connected to
the Fibre Channel loop switch, the remaining drive
enclosures are then daisy chained to the first.
C. The Fibre Channel loop switch cannot bypass a defective
port unless it has been notified by the attached controller
to do so.
D. Each Fibre Channel loop switch handles a dual redundant
E. Loop switches are not recognized by Command View
Answer: A, E