Installing & Supporting Standard HP SAN Environments
Questions, Answers, Braindumps (HP0-429)
Hi, I would like to thank www.braindumps.org for providing
help in such a manner. It was really of great help.
Which firmware version is recommended in a mixed 1Gb/s
and 2Gb/s M-series fabric?
A. most current firmware version whether it is a 1
or 2 Gb/s switch
B. most current firmware version on the 2 Gb/s switches
C. There are no firmware version restrictions.
D. a special multi-speed firmware version
In a Windows environment, when is full-featured MPIO
A. when using storage arrays that support active/passive
B. when using storage arrays that use asynchronous
C. when using storage arrays that support active/active
D. when using storage arrays in a single path configuration
What happens if you add a switch with an active zone
configuration to a zoned fabric?
A. Zones are automatically merged if they are not
B. All zones are disabled.
C. The fabric becomes segmented.
D. The whole fabric becomes disabled.
After gathering all customer requirements, you offer
a solution. Different validation levels are available
to ensure the solution meets or exceeds the customer's
needs. Which method is not adequate?
A. Compare the solution against the rules of the OEM
B. Compare the solution against the rules of the SAN
C. Set up a test environment which addresses most
D. Choose a supported standard solution of the SAN
Which storage protocol is used to create extended
SANs in the same name space over IP networks?
Which B-series command displays a summary list of
the switch ports?
Why should event logging be enabled on all devices
connected to a SAN?
A. Enabling event logging replicates the event log
to other devices for information redundancy.
B. Distributed event logging keeps the device event
logs small and prevents buffer overflow.
C. Certain events, such as signal loss, are detected
only in the locality of the problem.
D. Event filtering will not work correctly if event
logging is not enabled.
On what is soft zoning on 2 Gbps B-series switches
A. inquiry to the fabric management station
B. enforcement at ASIC level
C. use of the Name Server service
D. routing service calls
How do you add a new device to an active zone on a
B-series switch and make it available?
A. Add the device to the active zone and save the
B. Disable the zone configuration before you add a
device to a zone.
C. Disable the zone to which you add the device.
D. Add the device to the active zone and re-enable