Supporting the MSA 1000 and SCSI JBODS
Exam Questions, Answers,
Check some questions of HP0-238. Specially for you
One cooling blower in an MSA1000 assembly failed and
has been removed. What happens?
B. The remaining cooling blower operates at a higher
speed and initiates a shutdown after approximately
C. The fault LED flashes and the MSA1000 stops operating.
D. The remaining cooling blower operates at a higher
You are assigning DISK109 as a spare drive to array
B containing logical drives 2 and 3. What is the correct
CLI (command line interface) command?
A. SET SPARE ARRAY B DISK109
B. ADD SPARE UNIT=2 DISK109
C. SET SPARE UNIT 3 DISK109
D. ADD SPARE ARRAY B DISK109
In an MSA1000 environment, StorageWorks Secure Path
is necessary for __.
A. remote replication
B. password protection
C. multi-path support
D. data encryption
A Wide Ultra SCSI bus has 16 possible SCSI IDs and
a bandwidth of up to ___.
A. 80 MB/s with an SE or LVD interface
B. 40 MB/s with an SE or HVD interface
C. 160 MB/s with an LVD interface
D. 20 MB/s with an SE or LVD interface