Supporting the Enterprise Modular Library
Questions, Answers, Braindumps (HP0-205)
prepared it from www.exams.ws.All the exam questions
were in their guide. Here are some questions of them.
What is the maximum number of partitions allowed when
configuring partitions on an EML E-Series tape library?
What is the hard wired IP address of the interface
controller card in an EML E-Series tape library when
connected to the cascade port?
What are the standard cabling requirements for the
Interface Manager card of an EML E-Series tape library?
A. 4 x Ethernet to interface controllers, 1 x Ethernet
to robotics controller, 1 x Ethernet to LAN
B. 4 x Ethernet to interface controllers, 1 x Fibre
Channel to robotics controller, 1 x Ethernet to LAN
C. 4 x Fibre Channel to interface controllers, 1 x
Fibre Channel to robotics controller, 1 x Ethernet
D. 4 x Fibre Channel to interface controllers, 1 x
Ethernet to robotics controller, 1 x Ethernet to LAN
When configuring logical libraries from an EML E-Series
tape library, mailslots_______ .
A. must be configured for each logical library
B. are optional and may or may not be configured
C. can only be configured for Data Protector
D. are configured after the logical devices are created
and presented to the hosts
When completing the installation process in an EML
E-Series tape library, how can you verify that the
Fibre Channel links are functioning properly?
A. Disconnect and reconnect the cables and check the
B. Execute the fcping diagnostic utility from the
C. Power cycle the tape library and check the OCP
D. Issue the "diaggetput" command from the
command line interface.
What is NOT a severity level for events on EML E-Series