HP BladeSystems C-Class Solutions 1
Questions, Answers, Braindumps (HP0-064)
This braindump will be helpful to you. Try it.
What is the function of the internal USB connector
on a BladeSystem c-Class server blade?
A. flash boot-drive capability
B. access for a USB hub
C. configuring rapid deployment
D. disk-on-key authentication
A server blade sleeve is required for which BladeSystem
p-Class servers? (Select two.)
A. ProLiant BL30p
B. ProLiant BL25p
C. Integrity BL60p
D. ProLiant BL35p
E. ProLiant BL20p
To complete the installation and ensure proper cooling,
which step should you take after you have installed
the server blades in a BladeSystem c-Class enclosure?
A. Install redundant cooling fans.
B. Install blade and fan blanks.
C. Use Thermal Logic software to restrict BTUs
D. Activate the Insight Display and check for error
If Instant Support Enterprise Edition (ISEE) services
have been installed on a system, which event results
directly in notification to an HP support engineer?
A. a configuration error detected by Insight Display
B. any SNMP trap in Open Service Event Manager
C. an SNMP trap in OSEM that passes through event
filters and indicates the need for service
D. an event that meets predetermined conditions in
How does Virtual Connect appear on the network?
A. as a Pass-Thru
B. as both virtual and physical servers
C. as a switch
D. as resource partitions between CPUs
When a c-Class enclosure is configured as AC Redundant
with redundant line feeds, and the system experiences
a line feed failure, what is the result?
A. Available power is allocated to the server blades
according to their device bay number (zone) in the
B. The Onboard Administrator shuts down the number
of servers necessary to permit the system to run with
the available power.
C. The Onboard Administrator reboots the servers,
accesses the individual ROM-Based Setup Utilities
(RBSUs), and optimizes the Power Regulator settings.
D. The system keeps running with no loss of
Which HP service would you suggest for a customer
who wants help preparing their site that covers security
issues, enterprise management considerations, and
power and cooling solutions?
A. Smart Cooling Services
B. Factory Express Services
C. Consolidated Client Infrastructure (CCI) Services
D. HP Datacenter Environment Services
In a BladeSystem c-Class enclosure, how are the interconnects
connected to the device bays?
A. 100-pin connectors
B. connections are hard-wired
C. RJ-45 cables
D. CAT5 cables