REAL QUESTIONS SUBMIT MATERIAL ADVERTISE
Braindumps

Microsoft

Cisco

Citrix

CIW

CompTia

CWNA

Apple

Adobe

HP

Legato

Exin

Filemaker

Brocade

Ericsson

TIA

Veritas

ISEB

SCP

IISFA

ISM

OMG

Apc

Mile2

Foundry

Huawei

McData

Symantec

TeraData

RedHat

Solar Winds

Blue Coat

Riverbed

 

 
 
Click on name of dumper to view the dump
 

Taitum

 
 

 

Braindumps of E20-850
CLARiiON

Exam Questions, Answers, Braindumps (E20-850)

These are Guaranteed question for this exam. I only used www.exams.ws guide and i was succeeded.

Question: 1
Company.com needs a remote replication Exchange Solution. Currently the company is supporting 800 users and are expected to grow to 1600 users by next year. Four Storage Groups will be used to manage the user mailboxes. RPO is 20 minutes and the sites are five miles apart connected by two T1 connections. Which solution would best fit its requirement?
A. Create a MirrorView/A solution using Consistency Groups. Set the update interval to 10 minutes
B. Create a MirrorView/S solution dividing their LUNs between SPA and SPB using Consistency Groups
C. Create a MirrorView/S solution placing all LUNs for an Exchange Storage Group on either SPA or SPB
D. Create an Incremental SAN Copy solution dividing their LUNs between SPA and SPB, starting copies at 20 minute intervals
Answer: A

Question: 2
MMC routinely uses MirrorView replication between two data centers. The company currently uses the Write Intent Log feature on both arrays. Recently, when the primary data center suffered a major outage, production workload was transferred to the remote data center. When MMC failed back the production workload to the production data center, the company experienced full re-synchronizations of all its MirrorView LUNs. Why did this situation occur?
A. The Write Intent Log information is nonrelevant after the MirrorView secondary images have been promoted to primary images
B. The Write Intent Log information is stored on the SP cache and it was lost during the major outage of the production data center
C. The Write Intent Log information was never transferred from the production data center to the remote data center after the major outage
D. The Write Intent Log information was lost on the production data center during the outage and a full re-synchronization of all the LUNs was required
Answer: A

Question: 3
What is required to use the CLARiiON ktrace utility?
A. EMCRemote
B. Navisphere CLI
C. Navisphere Analyzer
D. Navisphere Manager
Answer: A

Question: 4
NLP Farm, Inc wishes to use SAN Copy to transfer data between CLARiiONs at two sites. When NLP tries to choose the destination LUN from Navisphere Manager, no LUNs appear in the list.
When NLP uses the CLI, the company can create and start a SAN Copy Session, but it always fails just prior to completion. What do you check first?
A. Verify that the target LUN is not a metaLUN
B. Verify that Source and Target LUN IDs match
C. Verify that the LUNs are of the same RAID type
D. Check the LUN size, in blocks, of the Source and Target LUNs.
Answer: D

Question: 5
A customer is running a high utilization Microsoft File Server connected to a SAN with Dual HBAs. This server needs to be backed up to a SAN attached tape library. The customer is running the required software to do the SAN backups. However, the customer is concerned about performance while backing up the data. Which two [2] immediate solutions can be proposed?
A. Backup the data over the LAN
B. Perform a Disk based backup
C. Use Clones as the backup source
D. Use direct attached tape based backup
E. Add a third HBA and zone it with the SAN tape library
Answer: C, E

Question: 6
SP Cache High and Low Watermarks usually differ by what percentage?
A. 10 %
B. 20 %
C. 30 %
D. 40 %
Answer: B

Question: 7
SIME fails to replicate the DBs on the production host. Which steps allow the job to complete?
A. Clear any -1018,1019, and -1022 errors in production host system log and restart the job
B. Clear any -1018,1019, and -1022 errors in the production host application log and restart the job
C. Clear any -1018,1019, and -1022 errors in the backup/recovery host system log and restart the job
D. Clear any -1018,1019, and -1022 errors in the backup/recovery host application log and restart the job
Answer: B

E20-850

 

 

 

Braindumps Real exam questions and verified answers - 100% passing guarantee - cheap prices.

 

Free brain dumps Braindumps, notes, books for free

 

Braindumps and Exams - Instant download real exam questions - Passing guarantee.

Follow us on FaceBook
Braindumps on Facebook
 
 
 
 
 

CheckPoint

Linux

Novell

DB/2

Network Appliance

EC-Council

Nortel

McAfee

Juniper

ISACA

PMI

Sybase

EMC

HDI

SNIA

ISC

Sair

IBM

Lotus

Exam Express

3COM

BICSI

DeLL

Enterasys

Extreme Networks

Guidance Software

Computer Associates

Network General

SAS Institute

Alcatel Lucent

SeeBeyond

TruSecure

Polycom

Hyperion

Hitachi

Nokia

Fortinet

Vmware

Fujitsu

Tibco

Intel

PostgreSQLCE

BusinessObjects

RESSoftware

BlackBerry

AccessData

ICDL

Isilon

SAP

The Open Group

ACSM

Altiris

Avaya

Cognos

F5

Genesys

SDI

ACI

ASQ

Google

H3C

HIPAA

HRCI

SOA

IIBA

Zend