REAL QUESTIONS SUBMIT MATERIAL ADVERTISE
Braindumps

Microsoft

Cisco

Citrix

CIW

CompTia

CWNA

Apple

Adobe

HP

Legato

Exin

Filemaker

Brocade

Ericsson

TIA

Veritas

ISEB

SCP

IISFA

ISM

OMG

Apc

Mile2

Foundry

Huawei

McData

Symantec

TeraData

RedHat

Solar Winds

Blue Coat

Riverbed

 

 
 
Click on name of dumper to view the dump
 

Rebecca

 
 

 

Braindumps of N10-003
Network+
(2005)

Exam Questions, Answers, Braindumps (N10-003)

N10-003 cleared…..thanks to www.exams.ws . The guide from this site was based on actual exam questions.

QUESTION 1
If one of the links to a computer on a physical star topology is served, what will be the result?
A. The entire network will stop working.
B. The affected link and the adjacent network links will stop working.
C. Only the affected link will stop working.
D. Only the adjacent links will stop working.
Answer: C
In the star topology each computer is connected to a central point by a separate cable or wireless connection.
Thus each computer has a dedicated link to the network central device and a break in the link between a particular computer and the central network device will affect only that computer.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 10-16.
QUESTION 2
When one connection to a host fails in a full mesh network, which of the following is true?
A. All hosts can communicate
B. No hosts can communicate
C. Half of the host will lose communication
D. Only the two hosts between the failed connection will lose communication
Answer: A
In a full mesh network, each node has a connection to at two other nodes. Thus, should one connection fail, it will have no effect on communication as all nodes will be connected to at least one other node.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 14-15.
QUESTION 3
Which of the following network topologies uses the most cable?
A. Star
B. Ring
C. Bus
D. Mesh
Answer: D
In the mesh topology, each node is connected to at least three other nodes. This requires more cabling than in the ring or bus topology, in which each node is connected to only two other nodes, or the star topology, in which each node is connected to a central hub or switch.
Incorrect Answers:
A: In the star topology, each node is connected to a central hub or switch. This requires less cabling than in the mesh topology, in which each node is connected to at least three other nodes.
B: In the ring topology consists of a closed loop in which each node is connected to the node ahead of it and the node behind it in the loop. This requires less cabling than in the mesh topology, in which each node is connected to at least three other nodes.
C: The bus topology is similar to the ring topology, except that the cable does not form a complete loop, but is terminated at each end. Each node, except the nodes at the end points, is connected to the node ahead of it and the node behind it along the cable. This requires less cabling than in the mesh topology, in which each node is connected to at least three other nodes.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 51-54.
QUESTION 4
Which of the following network topologies uses the least cable?
A. Star
B. Ring
C. Bus
D. Mesh
Answer: C
The bus topology consists of a single cable that connects the network nodes. Both ends of the cable are terminated just after the last node. Each node, except the nodes at the end points, is connected to the node ahead of it and the node behind it along the cable. This requires least amount of cabling.
Incorrect Answers:
A: In the star topology, each node is connected to a central hub or switch. This requires more cabling than in the bus topology, in which the nodes are connected on a single trunk cable that is terminated just after the last nodes at either end.
B: In the ring topology consists of a closed loop in which each node is connected to the node ahead of it and the node behind it in the loop. This requires more cabling than in the bus topology, in which the nodes are connected on a single trunk cable that is terminated just after the last nodes at either end and does not need to connect the ends together to form a loop.
C: In the mesh topology, each node is connected to at least three other nodes. This requires more cabling than in the ring or bus topology, in which each node is connected to only two other nodes, or the star topology, in which each node is connected to a central hub or switch.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 51-54.
QUESTION 5
Which of the following networking topology requires the MOST physical connections per node?
A. Bus
B. Ring
C. Star
D. Mesh
Answer: D
In the mesh topology, each node is connected to at least three other nodes. This requires more connections per node than in the ring or bus topology, in which each node is connected to only two other nodes, or the star topology, in which each node is connected to a central hub or switch.
Incorrect Answers:
A: In the star topology, each node is connected to a central hub or switch. This requires fewer connections per node than in the mesh topology, in which each node is connected to at least three other nodes.
B: In the ring topology consists of a closed loop in which each node is connected to the node ahead of it and the node behind it in the loop. This requires fewer connections per node than in the mesh topology, in which each node is connected to at least three other nodes.
C: The bus topology is similar to the ring topology, except that the cable does not form a complete loop, but is terminated at each end. Each node, except the nodes at the end points, is connected to the node ahead of it and the node behind it along the cable. This requires fewer connections per node than in the mesh topology, in which each node is connected to at least three other nodes.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, pp. 51-54.
QUESTION 6
At which of the following speeds does token ring operate?
A. 1 Mbps, 10 Mbps (Megabit per second)
B. 1 Mbps, 4 Mbps (Megabit per second)
C. 4 Mbps, 16 Mbps (Megabit per second)
D. 10 Mbps, 100 Mbps (Megabit per second)
Answer: C
Token ring initially operated at 4 Mbps. This was later increased to 16 Mbps.
References:
David Groth and Toby Skandier, Network+ Study Guide (4th Edition), Sybex, Alameda CA, 2005, p. 65.

N10-003


 

 

Braindumps Real exam questions and verified answers - 100% passing guarantee - cheap prices.

 

Free brain dumps Braindumps, notes, books for free

 

Braindumps and Exams - Instant download real exam questions - Passing guarantee.

Follow us on FaceBook
Braindumps on Facebook
 
 
 
 
 

CheckPoint

Linux

Novell

DB/2

Network Appliance

EC-Council

Nortel

McAfee

Juniper

ISACA

PMI

Sybase

EMC

HDI

SNIA

ISC

Sair

IBM

Lotus

Exam Express

3COM

BICSI

DeLL

Enterasys

Extreme Networks

Guidance Software

Computer Associates

Network General

SAS Institute

Alcatel Lucent

SeeBeyond

TruSecure

Polycom

Hyperion

Hitachi

Nokia

Fortinet

Vmware

Fujitsu

Tibco

Intel

PostgreSQLCE

BusinessObjects

RESSoftware

BlackBerry

AccessData

ICDL

Isilon

SAP

The Open Group

ACSM

Altiris

Avaya

Cognos

F5

Genesys

SDI

ACI

ASQ

Google

H3C

HIPAA

HRCI

SOA

IIBA

Zend