Brocade SAN Manager v4.4
Questions, Answers, Braindumps (143-340)
Submitting dumps with some changes. The original is
also available in www.brain-dumps.com.
You have a fabric of four VL4 (Value Line) switches,
and want to add a fifth switch to the fabric. To expand
a fabric of Value Line switches, which license must
A. Full Value license
B. Full Fabric license
C. Extended Fabric license
D. Ports on Demand license
A storage port is connected to fabric A, and a host
port is connected to fabric B. The administrator believes
that the Brocade SilkWorm Multiprotocol Router attached
to both fabrics A and B is properly installed and
configured. However, the host cannot access the shared
storage device. Which two commands will display devices
currently being routed between edge fabrics? (Choose
A. nsallshow, issued from the router
B. lsanzoneshow, issued from the router
C. nsallshow, issued from the edge fabrics.
D. lsanzoneshow, issued from the edge fabrics
Answer: B, C
Your company has recently installed a SAN consisting
of Brocade SilkWorm 4100 and 48000 switches. You are
tasked with setting up the environment to support
firmware upgrades when required. Which three must
be available to support this requirement? (Choose
A. An ftp server to store the firmware.
B. LAN access to the ftp server from ALL switches.
C. The ftp server must support PASSIVE mode transfers.
D. Access to an application to unpack the ".zip"
or ".tar.gz" firmware file.
E. The ftp server must provide read and write access
for the user account that will be used during the
Answer: A, B, D
Your senior SAN administrator is seeking to minimize
the account management process for the switches in
the fabric. Which Brocade product feature allows you
to accomplish this goal?
Your customer's LAN administrators have been implementing
new security policies throughout the enterprise. The
security policy requires you to restrict the management
hosts that may connect to the devices. Which feature
should you implement on the switch to achieve this
D. Secure Fabric OS
Your customer has an existing fabric with SilkWorm
3800 and SilkWorm 2800 switches. All switches are
located within the same datacenter. You have been
tasked with adding a SilkWorm 4100 at a remote site
50 km away using DWDM. Which three switch settings
should be checked prior to adding the SilkWorm 4100
to the fabric? (Choose three)
A. domain ID
B. switch IP address
C. Remote Switch License
D. Extended Fabric License
E. long distance port configuration
Answer: A, D, E
You are using Fabric Manager to make configuration
changes to every fabric so they are consistent with
the possibility of merging them in the future. Which
three parameters will the Fabric Merge tool compare
and change, if necessary? (Choose three.)
A. port zoning
B. port names
C. interop modes
D. switch names
E. port long distance modes
Answer: A, C, E
You are considering integrating SNMPv3 into your existing
network management station to provide secure management
to your SAN. Which two user roles exist for this application?
Answer: B, C
The SAN administrator is preparing to share devices
between two edge fabrics using a Brocade SilkWorm
Multiprotocol Router. Which three statements are true
about the edge fabrics? (Choose three).
A. The PID formats can differ.
B. The fabric IDs need to be the same.
C. The domain IDs could possibly overlap.
D. The E_D_TOV parameters can be different.
E. The WAN_TOV values need to be consistent.
Answer: A, C, D